David Clark 9800 Series Instrukcja Instalacji Strona 28

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 43
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 27
1
9532P-62 (03-11)
24
of 32
7. Captain’s Priority Switch (Optional)
T
he Captain’s Priority switch allows for the Captain to isolate himself along with Radio 1 and Radio 2 from
the Co-Captain and the Passengers. When this switch is ON, the Captain will have exclusive access to
Radio 1 and Radio 2. See section 10. Operation for complete details.
Parts/Tools Required
q C
98-15CP or C98-30CP Multi Use Cable (40892G-05 or 40892G-10)
q SPST/SPDT Switch (user supplied)
q Marine grade connectors (as needed, for user supplied switch)
q Wire cutters/Wire strippers
q Drill/Drill Bits (size dependant on switch used)
q Heat-shrink tubing
q Wire ties
Procedure
q D
etermine the location for the Captain’s Priority switch. Choose a location where the Captain
will have access to it, but it will not be accidentally triggered.
q Drill a hole the appropriate size for the switch selected.
q Route the C98-15CP or C98-30CP cable from the Master Station to the switch location. The
cable should be routed using under-deck conduits and be as far as possible from radio antenna
coax cables and anywhere water may collect. Use wire ties where necessary.
q Connect the cable to the Master Station’s jack labeled “Captain’s Priority”, see Figures 1&4. To
connect the cable to the Master Station, align keyways and push. Then firmly turn collar clockwise
until it locks into place. Pull back gently on the cable to ensure connector is properly locked.
q Route the unprepared end of the cable through the hole you drilled from the backside.
q Prepare the cable and connect to the user supplied switch in accordance with switch
manufacturer's instructions.
o Do not connect the shield, instead cut it flush to the jacket.
o The cable must be connected to the NORMALLY OPEN contacts of the switch.
q When the switch is closed, the Captain’s Priority feature is active.
q Mount the switch in the hole.
Przeglądanie stron 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

Komentarze do niniejszej Instrukcji

Brak uwag